Choosing Wrought Iron Railings for Your Property

Railings are a long-term investment. Therefore, there are a few important points to consider before purchasing or commissioning railings.

Check the Material First

Most items marketed with the term “wrought iron” are actually mild steel that has been cheaply and poorly rust-protected. In fact, almost all “wrought iron” items are actually made from mild steel – true wrought iron is extremely hard to work with (requiring constant hand reworking), has a textured “fibrous” grain and is typically far too expensive for most buyers.

Consider Height and Spacing

A typical height for boundary railings is 1 meter high. For structures near a highway, however, there may be restrictions imposed by local planning authorities. As well as the height, the spacing between the individual uprights must also be considered. For example, a gap of greater than 100mm between railings could pose a hazard to children.

Pick the Right Protective Finish

Hot-dip galvanising provides the longest-lasting rust protection. After galvanizing, railings are painted (powder coating available in numerous colours). Painted mild steel requires more maintenance. Suppliers have recommendations on the required frequency of maintenance based on climate and use.

Ask About Fixing Methods

The way that your railings are fixed into the ground will also affect the longevity of them. Concrete set posts are a solid fixing, but can create problems as they can harbour moisture at the base of the post. Bolt down fixings allow for easy removal of the railings in the future, and also help to reduce corrosion where the post meets the ground.

Keep Up With Maintenance

Inspect wrought iron railings each spring for signs of rust, damaged paint, and loose fixings. If any bare metal is uncovered treat with a rust-inhibiting primer and then paint with a suitable topcoat. Simple repairs can be undertaken as required.

Wrought Iron Railings is covered in more detail at https://donkeywellforge.co.uk/what-we-make/wrought-iron-railings/.

Thinking through what you need now will save you a lot of hassle later.

Thomas Hundley

Thomas Hundley

Thomas Hundley is a licensed contractor with over 15 years of experience in the home improvement industry. His passion for helping homeowners create their dream spaces led him to start this blog, where he shares practical tips, DIY guides, and insights on the latest trends.

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts

Home Improvement

Landlord vs. Tenant: The Legal & Relational Landmines of Boiler Upkeep

In November, when the temperatures drop significantly, few topics create as much tension between landlords and tenants as the breakdown of the boiler. The boiler breaking leads to the building becoming an icebox, and the issue quickly escalates from a maintenance problem to a legal and relational battle between the two parties. The Legal Structure: […]

Read More
Home Improvement

Composite Door Security and Durability Explained

This information was written with the intention that it would be read by someone looking to purchase a front door and considering the option of a composite door. Check for PAS 24 Certification Check the door carries the enhanced PAS 24 security rating, which means it has been tested for Impact, Manipulation and lock testing. […]

Read More
Home Improvement

What Happens During a Boiler Service

All engineers follow a set of checks that are carried out during a boiler service. The following is a guide as to what you can expect the engineer to do during the visit. Visual Inspection First Start with a visual check of the whole boiler, including the casing, pipework and flue. The engineer will be […]

Read More